 | | | ATF 43/43F | |
With a length of the preheat zone of 1.70 meter and process width of 330 or 400 mm offers the ATF 43 sufficient capacity for real high speed productions and offers all benefits of a high end wave soldering machine. But requires very limited space only because of its small foot print. Dual wave is standard, both lead-free compatible solder pot and spray fluxer is available. There are several highlights: the Auto-Detect feature of the spray fluxer recognises automatically position, width and length of the PCB. Flux is sprayed on this area only. To make maintenance as easy as possible, the solder pot can be rolled out of the machine completely without removing any cables or connections. And last but not least, by using a second solder pot it is easy and fast to switch from one alloy to another.
For preheating different infrared preheater and convection is available. Outstanding is the pump interlock: without any tools they are dismounted within 10 seconds. Than available space is no issue for thorough maintenance of the solder pot.
The micro processor controller controls accurately the machine and is easy to operate. Optional the ATF 43 can be operated with a PC too. Next to profile mangement the PC-software collects SPC data for process documentation.
The ATF 43 is available as nitrogen machine as well or could be upgraded at any time.
Available with belt and finger conveyor. | 
 "ATF 43/43F")
