DKR - Electronic Agencies Ltd. - Verifier (FSX-080)

Verifier (FSX-080) - Standard, X-Ray Inspection

Verifier (FSX-080)

Standard X-Ray Inspection System

The Verifier is an ideal low-cost BGA/SMT QuickCheck™ solder verification and defect detection tool with a footprint of only 32 x 34". Designed for fast and intuitive operation, the Verifier provides continuous real-time x-ray solder verification, fundamental defect detection and rework verification.

The Verifier supports a broad range of fundamental failure analysis and inspection applications from general failure analysis to rework verification.

Sample handling: up to 16 x 18" (406 x 457mm)

Small footprint of 32 x 34" | 813 x 864mm easily rolled to where ever needed (i.e., production floor, prototype lab, rework area, etc.)

110X magnification provides excellent viewing of the smallest SMD electrical interconnections.

Systems are CE, CSA and TUV certified and exceed all safety and radiation protection requirements set forth by CDRH and FDA regulations.

The standard sample manipulator has five angled set points, to provide angulations up to 30° or more depending on board size.

Angular viewing provides improved detection of opens, non-wetting and void position.

High-resolution 80kV, 50 micron no-maintenance microfocus x-ray source offers continuous real-time inspection, defect detection and failure analysis.
Sample Manipulator (Board Holder): Positions the sample in the x-ray path. Provides off axis positioning (tilt /rotate) of the sample between the source and detector
High-resolution 2/4" image detector with zoom lens provides >100X magnification for detailed viewing of the smallest SMD electrical interconnections.
Field-of-view (FOV), the system is capable of displaying 20mm packages in a single view for rapid identification of bridges, missing, poor shape and large voids.
Camera (lens optics and CCD Sensor): Converts analog light waves into digital video signals
The Image Processor (Computer, Frame Grabber and VIP software); captures and displays x-ray images in real-time while providing an operator with tools to enhance, identify, analyze, measure and report — sample quality and defect characteristics.