The roll-out solder pot
SLS Preheating section
SLS Preheating section
With a process width of up to 250 mm offers the ATF 13/25 all what is expected from a up-to-date wave soldering machine. It comes with a dual wave as standard; lead-free compatible solder pot and spray fluxer is available. Outstanding is the pump interlock: without any tools they are dismounted within 10 seconds.
With a process width of 330 mm offers the ATF23 sufficient throughput for most productions but requires very limited space only because of its small foot print. Although a midsize machine, the ATF 20 offers all benefits of high end wave soldering machines. Dual wave is standard, both lead-free compatible solder pot and more.
With process width of 330 or 400 mm, the ATF 33 is good for highest throughputs and offers all benefits of a high end wave soldering machine. But requires very limited space only because of its small foot print. Dual wave is standard, both lead-free compatible solder pot and spray fluxer is available.
With a length of the preheat zone of 1.70 meter and process width of 330 or 400 mm offers the ATF 43 sufficient capacity for real high speed productions and offers all benefits of a high end wave soldering machine. But requires very limited space only because of its small foot print. Dual wave is standard.
The VP-400 Vapour Phase offering Unique feature is the temperature profile control software: by defining up to 20 temperature set values, the machine will run the respective profile automatically. The distinct algorithm ensures the tray with the pcb is exposed accurately to the required temperatures with the corresponding times.
With ATF selective soldering has become affordable and is a clear alternative to manual soldering of connectors and other conventional components. With higher and reproducible quality at the same time.
Sturdy construction, easy access and highly reproducible process parameter s are the characteristics of the ATF SLS.